​Preparatory work before laying:
The asphalt shingles are installed on a flat surface of wood greater than or equal to 14 mm wide. Remember to treat your wood with an insecticide and fungicide product before starting the installation of your shingle roof. Indeed, once installed, it will no longer be possible (or very difficult) to apply these protective products.
 
To best prepare for the installation, you can grid your roof using a marking line. The marking should be parallel to the gutter and should start 20cm from the edge of the roof. You will need to grid your roof by drawing a perpendicular line then draw lines, parallel to the first horizontal line. Ideally, space these lines 15cm. This step may seem restrictive, but it is necessary to obtain a uniform installation of the shingle on the roof.
 
Place your Shingle:
The installation of the roof shingles is always done from bottom to top. Consider installing a zinc strip around the edges of the roof to protect the coating from rainwater and other bad weather that tends to deteriorate the roofs.
 
Once the application of this zinc strip is made, you can then start laying the shingle:
 

• First, apply the first strip of shingle upside down.
• Then, double it by putting a second layer superimposed in the right direction this time.
• Then move on to the second row and so on.

 
 
The bands are to be stapled or nailed to the previous row in five points. It is important to nail the shingle strips from left to right throughout the application to avoid tearing. When installing the shingle, you must ensure that only the patterns of the slate appear.
 
If after this tutorial you still have trouble visualizing how to install the shingles don't panic! The material is usually accompanied by a shingle installation guide at the time of purchase explaining the installation method step by step.
 
It is also advisable to carefully follow the installation instructions indicated on the instructions because the installation methods may vary slightly depending on the brand of shingle you have purchased.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.

​Whether during renovation or when installing a new roof, ventilation work ensures that the roof is well ventilated.
 
If your roof is recent and has been installed by a professional who knows his trade, it is normally well ventilated. Otherwise, work can easily be done to remedy the problem.
 
You should know that the ventilation of the roof is done through the space between the roof and the insulation.
 
This void under the roof located between the battens (or the under-roof screen) and the top of the insulation allows good ventilation of the roof. But this vacuum is not enough. Elements must be put in place to ensure the ventilation of the roof.
 
Ventilation of tiled roof
If you have a tiled roof, be aware that rounded tiles generally allow air to circulate. It will, therefore, not be necessary to add another ventilation system if your roof is equipped with this type of tile. Do not hesitate to inquire with a roofing contractor or with the supplier of the tiles if you decide to do any installation or roof renovation work yourself.
 
Elements for roof ventilation
There are some things that help improve the ventilation of your roof. Consider including them in the installation of your roof.
 
The roof cat flap
The roof cat flap comes in the form of a small opening in the roof that allows air ventilation.
 
Roof cat flap comes in various shapes and comes in a variety of materials. You will easily find a cat flap adapted to your type of roof.
 
You will easily find suitable roof cat flaps for the materials and configuration of your roof.
You will find roof cat flaps in different shapes (square, rounded or rectangular) and in different materials (terracotta or Zinc). Note that there are also roof cat flaps suitable for VMC outlets.
 
For the installation of a roof cat flap, it is recommended to install a roof cat flap every 20 m2 for a tiled roof and one every 10 m2 for a slate roof. Everything will, of course, depend on the configuration and specificities of your roof.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.

Roofing companies can help you clean your slate roof. To extend the life of your roof, it is essential to carry out regular maintenance. Beyond cleaning, defoaming or specific treatments must be carried out depending on the case to ensure the durability of your roof.
 
In this article, we will give you insights on how to clean a slate roof. You will learn tips for optimal maintenance of a slate roof.
 
Moss removal from a slate roof
Moss on slate will generally be easier to remove than moss on clay tiles, which can cling more deeply. To remove the foam, you will have the choice between:
 

• Manual brushing (recommended)
• High-pressure cleaning (to be avoided)
• Chemical treatments

Roof brushing
For manual brushing, using a stiff brush and water, you will need to scrub the foams to make them fall out. Then rinse the roof with water, from top to bottom, having previously removed any large residue that could clog the gutters.
 
Product level, avoid bleach or other corrosive products which could damage the slates (and which are also very bad for the environment).
 
When cleaning a roof, it is recommended to protect its gutter to avoid clogging it. After cleaning, you will, in most cases, need to clean the gutter.

High-pressure cleaning of the roof
High precision cleaning is mentioned here, but it is not recommended for a simple reason, you risk damaging your roof.
 
In fact, cleaning the roof at high pressure can wreak havoc on a slate roof. If you want to carry out high-pressure cleaning, it is better to entrust it to a professional who has the necessary experience in the matter and will use the right method so as not to damage the slates.
 
If you still want to try the experience yourself, direct the jet in the direction of the flow of the water and move up and down. Maintain a sufficient distance between the jet and the slates not to damage their surfaces.
 
If you live in Charlotte and Concord, NC, and you would like to clean your slate roof, you need to employ the services of the best roofing company in the area. They will help with the cleaning process of your slate roof. They will also help with any other roofing task you may have.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.

Start by preparing your roof. As with all painting jobs, you need to make sure your roof is clean and healthy.
 
You will have to start by repairing any cracks and changing in the broken tiles if you have spotted any.
 
It will also be necessary to carry out a complete cleaning of the roof. If necessary, you will have to carry out a defoaming of the roof in order to rid it of lichens and other mosses that have taken up residence there. Once your roof has been repaired, cleaned, de-mossed, and dusted, it must be allowed to dry properly. When it is completely dry, you can move on to the next step.

You can then attack the first coat of paint. It is recommended to use a paint gun so that the installation is more uniform. Each paint being different, it is advisable to refer to the preparation and installation instructions indicated on the pot. Then all you have to do is apply the first coat and let it dry for the desired time.
 
For the application of the second coat, just proceed as for the first coat with your paint gun. A second coat is recommended, whatever your project. For drying, the recommended drying time is 1 week.
 
At the end of the drying process, you can proceed to a light brushing to clean the residue left on your roof.
 
When to paint your roof?
The roof is located outdoors and therefore exposed to temperature variations and bad weather. It is, therefore, important to choose the right time to paint your roof.
 
The ideal is, therefore to plan to paint your roof when the temperature is mild.
 
You should also remember to paint on a day when the wind is absent. Ideally, allow a week without rain or bad weather so that the paint has time to dry properly. Spring, therefore, seems to be a good season to paint your roof.

How to paint your roof
For the painting of your roof, it will be necessary to intervene on a sunny day. The weather forecast for the week must also be as lenient as possible for optimal drying.
 
If you live in Charlotte and Concord, NC, and you would like to paint your roof, you need to employ the services of the best roofers in the area. They will help with the painting of your slate roof. They will also help with any other roofing task you may have.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.

Single or double skin cladding
The installation is different if the cladding is single or double skin. For the first case, it is necessary to install the load-bearing framework, then the secondary framework before putting the exterior facings. For the second case, you have to fix the trays on the structural posts, insert the insulation and then install the intermediate rails as spacers and finish with the exterior facing.
 
Installation of sandwich panel cladding
The sandwich panels are installed with two facing sheets. An insulating foam is injected between each rib. Then side profiles are added to complete the set. This type of cladding is superimposed between the ribs to fit together. In the end, you have to lay the cladding feet, angles, and coverings.

​The use of cladding roofs has been on the increase in recent times. Buildings all over are now adorned with cladding roofs. But, as you’ve read from this article, the installation of cladding roofs is quite complex. Hopefully, through this article, you’ve learned the steps involved in the installation of a cladding roof.
 
With the complexity of the installation of a cladding roof, it is definitely a roofing task that requires the expertise of a roof installer.
 
If you live in Charlotte and Concord, NC, and you would like to install cladding roofs, you need to employ the services of the best roof installer in the area. They will help with the installation process of cladding roof on your building. They can also help with any other roofing task you may have.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas

​Top roofing companies can carry out different tasks in addition to roofing. If you need to employ a roofing company for your roofing tasks, it is important to know what works they specialize in to avoid misunderstandings. Discover in this article all the work that roofing companies carry out, with some practical advice.
 
Work relating to construction
Roofing companies play an important role in the construction of your house. A roofing company can provide a free estimate for the design and construction of your roof. These include the choice and installation of the roof (tiles, slates, sheets, etc.), but also the construction and arrangement of the terrace. The roofing company also takes care of the insulation of the attic and the fitting out of the attics if necessary.
 
Work relating to maintenance
A roofing company helps with the maintenance of your roof. To take care of your roof and to avoid accidents, roofing companies will maintain your roof. Whether it is to detect and replace defective materials, unclog gutters, or to carry out moss removal, the roofing company is your ally in all matters relating to maintenance. All this helps prevent sealing problems later on.
 
Roofing companies carry out a lot of tasks, and it is important you know the different tasks they engage in. Hopefully, from this article, you’ve been able to learn about the different tasks they can help out with.
 
Most of these tasks are complex and require the expertise of an expert to execute, so it is best advised you employ the services of a roofing company. If you live in Charlotte and Concord, NC, and you need to carry out any roofing task, then you need to employ the services of the best roofing company in the area. They would help with any roofing task you may have.  Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.

Roof repair contractors can help rework your tiled roof. A tiled roof covering is very advantageous, especially for the aesthetics of the house and the longevity of the roof. Sometimes, a reworking is necessary following damage to the tiles or to renovate them. In this article, you will learn about how to rework a tile roof.
 
What is a tiled roof?
With many roofing materials out there, it may be challenging, but it is essential to determine a tile roofing product. Tile roofs are made of local, natural, recyclable materials such as clay, slate, and concrete. These materials are durable and fireproof, two qualities that set them apart from other roofing materials. Tile roofs are made to provide a barrier between the inside a building and the outside harsh weather conditions.
 
The steps to follow for the rework
After careful inspection of the roof, the professional roofer can conclude that the remodeling is profitable. In this case, it will start by installing a protective device to prevent possible falls. Then he removes the tiles from bottom to top. Those that are in poor condition will be discarded, and those that are reusable will be kept for reconstruction. He should also take the opportunity to remove mosses and lichens from the roof. He will then check the condition of the frame and battens. Once all these steps are finished, the roofer begins to lay the tiles. If he has kept old ones, he will have to alternate them with the new ones to make the result more harmonious.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.

​To determine that there is a problem in the waterproofing of your roof, a rigorous and periodic inspection is advised at least twice a year. This involves seeing if signs of wear and degradation appear on the roof. This is particularly the case when roofing support or rafters show wet marks. Also, check that the insulation is not wet, especially after a heavy rainfall. The same goes for plywood, which can show water spots. The sagging, the appearance of holes as well as the deformation of the frame are also signs of the non-waterproofing of the roof.
 
The need for a professional to check the waterproofing of your roof
When the verification of the waterproofing of the roof shows certain traces of humidity or mold, you must contact a roofing company in your area as soon as possible. By using a qualified professional, you can be sure to find the source of the leak. The roofer will be able to proceed with its repair thanks to his knowledge and skills. He will also have to check your entire roof to avoid any recurrence. In some cases, the roof may require a major repair or even a complete renovation. A roofing company in your area will be able to carry out the work.
 
Contact the best roofing company in Charlotte and Concord, NC
Water leaks can cause a lot of damage to the structure of a building and your valuables in the building. It is important to do a periodic inspection of your roofs. This will help you detect issues with the waterproofing of your roof on time before it causes damage.
 
Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.