Charlotte Roofer
  • Blog
  • About
  • Contact Us
  • Blog
  • About
  • Contact Us

Roof repair contractors in Charlotte: How to inspect hail damage on your roof

8/31/2021

0 Comments

 
Roof repair contractor
A roof repair contractor, in Charlotte NC, is usually alert when there is an extreme weather condition. This is because extreme weather conditions always harm roofs. One of the most dreaded of them all is a hailstorm. When there is a hailstorm, lots of roofs suffer. And if not repaired or inspected, the outcome may become worse which means more expenses for you.

Aside from your roof, hail can also damage your car, windows, walls (a strong reason why you need a siding for your house), and any valuable thing outside your house. Hailstorms are most homeowners' worst nightmare and roof repair contractors know that. In this post, we would show you how to inspect damages, like holes and debts, on your roof.

Most common hail damages on the roof
Another reason to conduct a hail damage inspection is to find out the type of damage caused, how much damage was caused, and how to fix it. Roof repair contractors in Charlotte have identified different roof damages that a hailstorm can cause. These roof damages differ according to different factors – hail size, quality 9f roofing materials, the direction of the wind, and so on. The damage can lead to leaks on the roof and can grow worse if not properly taken care of.

1. Cracked shingles
Cracked shingles are one of the causes of a weak roof. Hail, especially the very heavy ones, can crack the shingles 9f your roof and leave you with an exposed roof with tears and bare spots. High winds tend to bend the shingles backward. This also contributes to the cracks.

2. Loosened self-seal strip
For asphalt shingles roofs, the shingles have a self-sealing strip that can be weakened or destroyed by hail and high winds. The sealing strip is forced to separate from the shingle. This weakens the shingles and causes them to be easily blown away.

3. Loss of granules
Granules are sandpaper-like waterproof mater6 that allow the flow of water away from the roof. When hail hits the roof and causes an indentation that removes some of the granules leaving your roof exposed to water. The best way to check if some granules were lost is to check in your gutters and downspouts.

How to inspect your roof after a hailstorm
According to expert roof repair contractors, it would be easier to identify obvious roof damages but minor damages may be difficult to identify or inspect. As someone with an untrained eye for spotting minor damages, you would need to hire an expert for this so you wouldn't miss anything.
  1. Check your gutter for loose granules that may have clogged it. If you see granules, then it means your roof was damaged. Also, look for dents and holes on your gutter and downspout.
  2. Check your sidings for any cracks or dents. When the hail is accompanied by high wind speeds, it means that there is a high possibility that the roof damage would be very severe. The diameter size of hail can have mild or severe damages. Bigger hail sizes can damage harder roof materials like concrete and clay.

Charlotte's #1 roof repair contractor
When you ignore roof damages, they can easily develop into something worse like leaks, mold damages, and even rotting wood. And an improperly repaired roof is vulnerable to more damages.

Get the best roof repair contractors to repair any damages. This would have lots of costs in the future and ensure you have a safer roof and siding. Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

Roofers in Charlotte NC discuss how to repair a tile roof

8/30/2021

0 Comments

 
Roofers Charlotte
​Roofers in Charlotte and homeowners are now actively engaged in repairing broken roofs. Different factors can cause your roof to need a repair irrespective of its longevity or durability level. Some of these factors are uncontrollable, for example, natural disasters like hail and heavy rain. However, others are controllable, for example, improper roof installation.  The best way to safely repair your tile roof is to hire a professional roofer.

How to repair a clay roof tile
A leaking roof is taunting any homeowner. It makes the house look and feel unpleasant. A broken or missing tile can cause this damage.

The first step to take is to identify the damage. The roof damage might be anywhere. Identifying bits would help you determine how you would repair the damage. A professional Charlotte roofer would help you locate the damage at its exact point and explain the possible causes. It is important to note the causes and take precautionary measures next time. As earlier mentioned, the cause of the damage would determine the solution method.

For cracked or broken clay roof tile:
  • Carefully lift the tiles close to the damaged tile with a flat pry bar. Do this carefully to avoid damaging the good ones when you lift them.
  • Do the same thing to the damaged tile. If it is not coming out, use a hammer or pry bar to break the tile.
  • Remove the nails that held the tiles. Then apply roofing cement to the spot where the damaged tile was. Now apply a new tile and out the first tile back.

Be careful in doing this so as not to cause more tile damages.

For small cracks and holes on the roof tiles
Simply apply plastic roofing cement to seal the crack or hole. Use a hand trowel or something with a flat surface to smoothen the cement and get a clean surface.

For leaks:
  • Using a flat pry bar, lift the tiles around the damaged area.
  • Use roofing cement to fill the hole. You can also replace the tile if it was also damaged

However, the damage caused might be more severe and cannot be fixed by yourself. Contact an expert roofer to do smooth work.

Charlotte's #1 roofer
Damaged roofs can wreak more havoc to the home. Immediate steps should be taken to prevent further damage. You might want to save more money by doing it yourself. That is very good but not advisable, and you could get injured or worse.

Expert roofers Charlotte would give you a quality roof repair and increase its lifespan. Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

SHINGLES REPAIR: 5 VITAL SIGNS YOU NEED TO REPAIR YOUR CHARLOTTE ROOF

8/29/2021

0 Comments

 
Shingles repair
Shingles repair experts in Charlotte NC explain that the roofs give vital warning signs indicating it needs to be repaired. The roof is undoubtedly one of the most important parts of the house. But then again, because it is above the house, many people do not give it that much attention. Then when rain, snow, or a storm comes, they are left with a soggy and dripping ceiling.

But the roof didn't start leaking all of a sudden. It showed some warning signs that it needs to be changed. But it was overlooked by the homeowners due to poor maintenance and neglect. Maybe this leakage was caused by dents on the roof or a poorly installed shingle. If that is the case, then you need a shingles repair.

5 vital warning signs for roof replacement
As earlier mentioned, before your roof leaks, it must have shown signs of damage. It is important to inspect your roof once in a while in case any damage has occurred. When checking out your roof, look out for these warning signs and contact a roof shingles repair expert immediately or you could get a whole new roof.
  1. Cracked shingles: When it comes to roof damages, shingles are one of the most damage-prone parts. If you check your roof and find out that you have broken shingles, either one or multiple cracks, then you need to repair your roof. A cracked shingle would trap moisture on the inside of your roof. When moisture is trapped inside your roof, you need to contact an expert to make the shingles repair immediately.
  2. Clogged gutter system: Gutters ought to be maintained and cleaned. It is during that time you would notice if there is a clog or not. Certain things like leaves, broken branches, or debris might pass through the pipe and clog it up. Get a roof repairer to inspect and fix any damages on the gutters.
  3. Granules in the gutter: Still on the gutter, if you notice any sand-like granules on your gutter, then you really need to check the shingles of your roof. It is a sign that your shingles are wearing out and definitely need to be replaced. You need a shingles repair for your roof.
  4. Dented roof: This is especially for metal roofs because they are prone to getting dents. After a storm or before a storm, inspect your metal roof for any dents that may have occurred. That dent might have caused some damage to the roof's shingles. A dented roof can also cause cracks and holes in the roof. This is a sign you need to replace that part of the roof immediately.
  5. Wet ceilings or walls: If you notice any leaking from your ceiling or you see wet patches on your ceilings, it means that there is damage somewhere and water has been trapped inside your roof. It may be a bit difficult to find the exact spot where the damage is because water flows downward so it is very likely that the spot the wet patch appears in is not the same spot the damage occurred.

Charlotte's #1 roof shingles repair experts
These warning signs might look as small or insignificant compared to other needs of the house but, as roofing experts, do not neglect your roof. Your roof is a very important part of the house. Once the roof is damaged, then your house becomes vulnerable and exposed.
​
Inspecting your roof might seem daunting because, in most cases, you wouldn't know what you are looking for. A professional roofing company would help inspect every damage thoroughly and take care of all shingles repair and any other roofing repair necessary. Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

Roofing company in Charlotte explains why your home needs siding

8/16/2021

0 Comments

 
Roofing company
A top Charlotte roofing company encourages residents to side their homes. Siding refers to the protective covering on the exterior walls of your building. While the roof protects your house from harsh weather conditions, siding protects the walls and interior of your house from these weather elements. Aside from protecting the walls, it also adds beauty to the walls of your building. Siding is also called wall cladding.

There are different types and styles of siding available. It is made of different materials; from aluminum, steel, vinyl, wood, asphalt, and cement. You can also combine materials. These are called composite materials.

Why you should side your home
The aim of siding your house is to protect it from weather elements like intense sun, rain, snow, wind, and so on. When the walls of your home are exposed to such elements, it affects their structure and life span.

Also, siding your house makes it more valuable especially when you want to sell it. You are guaranteed a strong and protected house. This is one of the things buyers look out for when purchasing a house. Without siding, the walls on the interior of your house would become prone to damage and may form molds.

Another benefit of siding your home is managing energy bills. With properly insulated siding, the utility bills that come from the heating and cooling of your home are managed. But you need to make sure that the sidings are properly stalled by a roofing company.

Top 3 types of siding for your house
Now you have seen the importance of siding your house, you might be thinking that it's time to finally get those sidings for your house. You are absolutely right! But before you get, you need to know the top 3 sidings available so you would have an idea of what you want to get.

1. Stone siding: These are also known as slate shingles. It is usually used in rural areas. It has a very strong durability level.
2. Metal siding: Metal sidings are very good for your house. They are also very good for industrial buildings. Metal materials include steel and aluminum. Sometimes, copper is used as a material. Metal sidings are popular because of their malleability, durability, and beauty (because they come in different colors).

Charlotte residents usually prefer aluminum sidings to other metal sidings. This is because, when reacted with air, aluminum forms an aluminum oxide which is a very hard coating that protects the aluminum surface from degradation.

3. Wood siding: Wood sidings are very common in rural areas and some country homes. They are very versatile and can be painted in different colors. One of the best qualities of wood sidings is that they are easy to install and repair. But they require more maintenance because wood isn't as durable as other siding materials like metal. Wood is susceptible to degradation by ants and termites.

Charlotte's #1 roofing company
Roofing companies in Charlotte offer protective exterior services. Protecting the walls of your home is very essential if you want to preserve the quality and structure of your building. But a poorly installed siding would not make an impact. Instead, you would only end up incurring more costs when damages occur.

To get the best results and be on the safe side, you should hire professional help. An expert would properly inspect and install the best siding choice for your house and also offer advice on how to maintain it. Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

Roof installer: How to install a gutter in your Charlotte home

8/8/2021

0 Comments

 
Picture
The top roof installer in Charlotte NC teaches the residents how to install gutters on their roofs. Installing a gutter or any other drainage system on your roof is very important, especially if you have a flat roof. If you don't have a gutter, water retains on the roof, weakening the material of the roof. This causes the water to slip into the roof causing wet marks on your ceiling and putting you at risk of damaging the structure of your building.

Also, this roof installer warns that improper installation of the gutter or any other drainage system would only cause more harm than good. A gutter is one of the most common types of drainage systems in homes.  So, it is important to ensure that your drainage system is properly installed. To be on the safer side, you should hire a professional roof installer to help with the installation process.

But if you want to do the installation by yourself, here are simple steps to installing your gutter system.

Installing your gutter
1. Get quality material
The first thing to do when installing your gutter is to get quality gutter material. There are several materials available in the market. Likewise, there are both poor and high-quality materials. If you do not know the difference between poor-quality material and a high-quality one, you could consult your local roofer for advice.

Gutters are made from metal (aluminum or steel). Whichever one you choose; a poor-quality material would only lead to more repairs and maintenance. So, invest in a high-quality one.

2. Get started
Set your workstation by arranging a sheet of plywood on a pair of sawhorses. With a gable roof or a simple hip roof, just start at one end.

Install a slip-joint splice on each end of an inside corner fitting. Slide the splices as far as they will go. Now, trim the first section of the gutter to length with tin snips. Use a square and pencil to mark the gutter length and cut to the line. If the tin snips interrupt the profile of the gutter, just bend it back into shape with needle-nose pliers. You can also use a chop saw or saber saw to cut the gutter material.

Fasten these compounds by using either short sheet metal screws or pop rivets. If you choose rivets, begin by boring several 1/8 in. holes through the fitting into the hole. When it bottoms out, squeeze the handle several times until the rivet flattens and the stem shears off.

3. Attach end caps
Install an end cap to the pop rivets. They can be simply glued in place with a gutter lap sealer. Hold the end cap in place temporarily with a single sheet-metal screw. Remove the screw and replace it with the pop rivet.

After that, cut downspout holes and install a downspout outlet fitting in the gutter. Measure carefully to determine the best location for the outlet fitting. Then, set the fitting on the bottom of the gutter and trace around it. Cut a starter hole in the gutter with a saber saw and nibble out the finished opening with tin snips. Use the flange to mark the screw-hole locations and bore 1/8 in holes through the gutter. Finally, insert the filling into the hole and fasten it with short screws.

Tip the hooked end of the bracket under the front flange and press the remaining end over the back of the gutter. With help, lift the gutter in place, and secure the corner first, screwing the bracket into the roof's fascia. Secure the rest of the hangers with 2-in galvanized nails or screws.

4. Final Installment
Now it is time to install the downspouts and downspout extensions. Start by pushing the one end of the downspout elbow onto the first outlet fitting. Then, hold the second elbow in line with the first elbow. Measure the distance between these fittings and cut a short length of downspout to join them, allowing for about 1 1/2 inches of insertion on one end. Slide the short length of the downspout onto the bottom of the top elbow and slide the top of the lower elbow onto the short length. Rivet all joints, including the connection with the outlet.

Install two U-shaped downspout brackets on the corner of the house, one high and one low. Bring the downspout to within 1 ft. of the ground and install the last elbow. Finally, trim a notch in one end of a 36-in. length of downspout to make a fold-up extension. Just cut several inches from the top half and screw the extension to the elbow on each side. This arrangement delivers the water well away from the house but allows you to tip up the extensions when mowing your lawn.

Top roof installer in Charlotte
Installing a gutter on your roof could be more work than you want to try. Don’t risk injury, contact a professional to get the job done right.

Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

Commercial roofer: The best of green roofs in Charlotte NC

8/7/2021

0 Comments

 
Commercial roofer
​A commercial roofer in Charlotte agrees that green roofs are one of the best types of roofs for commercial buildings. Green roofs are commercial roofs that are covered in green vegetation. They are also known as vegetative or eco-roofs. Green roofs add beauty to the building.

A green roof consists of lots of layers – vegetation, growing medium, drainage layer, waterproof layer, a strong roofing membrane, thermal insulation, vapor control layer, and control roof support, and structural roof support.

Types of green roofs
A commercial roofer in Charlotte explains that greed roofs are divided into two categories: Intensive and Extensive. In most cases, they are divided into three categories: Intensive, semi-intensive, and extensive.

Intensive green roofs weigh more pounds, approximately 150 pounds per square foot. This type of green roof takes a lot more effort to manage because it is quite similar to managing an actual garden.

Extensive green roofs, on the other hand, are much smaller and carry less weight - approximately 60 pounds per square foot. They are allowed to grow without restrictions, i.e., they are allowed to grow naturally. As it is like that, extensive green roofs require less maintenance when compared to intensive green roofs.

Benefits of using green roofs in Charlotte NC
Aside from its impeccably beautiful appearance in roofs, green roofs have a lot of other benefits which are divided into public and personal.

Protective layers
A green roof has lots of layers and that makes it very less likely for water to get in. This reduces any associate waste that would have occurred. Instead, the water is returned to the atmosphere, after being stored in the substrate, through transpiration. As it is summer, the green roofs hold more water.

Improved air quality
Green roofs help filter the sir around the city by reducing the particles of dust and other air-borne pollutant flying all over.

Recreational space
Green roofs can serve as a recreational space for children, including adults too. It can also serve as a terrace restaurant. Green roofs absorb a huge amount of sunlight, thus making the environment conducive for outdoor activities.

Low noise
Vegetative roofs absorb lots of noise, especially when it is raining heavily. It also extends the lifespan of the roof because the green vegetation protects the roof from any harsh weather conditions or damages that may occur. Installing green roofs is a very good investment.

Eco-friendly
This one goes without any explanation. Green roofs are very environmentally friendly. The vegetation could serve as home to some news and other beneficial participants of nature.

Charlotte's #1 Commercial roofer
A commercial roofer in Charlotte encourages building owners to go green if need be. It is very cost-effective and adds beauty to the building. But before doing so, please inspect your roof to know if it is capable of handling the many layers of a green roof.

Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

Roofing company suggests the best chimney caps in Charlotte NC

8/1/2021

0 Comments

 
Roofing company
​Top roofing company explains that chimney caps are essential for residents in Charlotte. You probably have a chimney and sometimes wonder if something can creep into your house through your chimney, so you want to find a way to cover it. A chimney cap is a protective covering that covers the top of your chimney.

Placing a chimney cap over your chimney protects your fireplace from rain, snow, and any unwanted thing from entering your house. Most homes in Charlotte and the surrounding areas like China Grove and Kannapolis are opting in for the installment of a chimney cap because they know that without a cap, your chimney is like a house without a roof — open and exposed. It could damage your fireplace.

The best chimney caps are usually made of copper mesh and steel. A properly installed chimney cap not only protects your chimney from any unwanted damage but also has a beautiful aesthetic to your home.

It is advisable to hire a professional roofing company to help you with the installation. There are different types of chimney caps available in the market. Keep reading to know about the best options available.

Best types of chimney caps for your chimneys
Getting a chimney cap can be overwhelming, especially if you know nothing about chimney caps. When choosing a chimney cap, it is advisable to consider budget, longevity, and installation process. Here are the best types of chimney caps to consider:

1. Electrical Draft Chimney Cap
This is a more modern type of chimney cap. It comes with an attached electric fan. You can control the speed level of the fan depending on the fire condition or the weather. It makes the roof look beautiful and modernized. Electrical draft Chimney caps are available in different sizes, precisely from 3 to 12 inches.
However, these caps can be pricey. They cost between $60 to $200. It is worth it because of the amazing benefits they come with.

2. Standard Chimney Cap
Just like the name, these chimney caps are very standard. They are attached with screws and come with screens to keep animals like squirrels and stray cats away. Standard chimney caps come with fasteners and are made of copper, stainless steel, and sometimes galvanized metal.

These caps are most common in Charlotte buildings. The screens help hold back sparks that shoot from the fireplace. This is a huge benefit because if not trapped, these sparks can shoot over the chimney and into the yard causing an outdoor fire. Standard chimney caps are worth between $40 to $300.

3. Custom Chimney Caps
This is a chimney cap specially designed for your chimney. The roofing company will inspect your chimney and fireplace and determine the type of chimney cap you would need. It is usually the most expensive among other chimney caps costing between $300 to $1,600.

This cap is customized just to fit your chimney. Because chimney flues can be complex, it is advisable to get one that fits the flue of your home. A roofing company would help in the construction, design, and installation of the chimney cap.

The top roofing company in Charlotte NC
Chimney caps are a must-have for every chimney. It protects your fireplace from getting damaged and saves you lots of money, time, and energy that will have been spent fixing a damaged fireplace.
Improper installation would cause more damages. Hire a professional roofing company in Charlotte to help you decide on the best cap for your chimney and help you properly install a chimney cap. Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.

0 Comments

    About

    Learn about your options when it comes to roof repair and roof installation in Charlotte.

    Archives

    May 2022
    April 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    March 2017
    February 2017
    January 2017
    December 2016

    RSS Feed

Powered by Create your own unique website with customizable templates.